Metabo Mitre Saw KS 216 M Manual

The Metabo Mitre Saw KS 216 M is a powerful and versatile tool designed for precise cutting of various materials. It features a robust motor, adjustable cutting angles, and a laser guide for enhanced accuracy. This manual provides essential information on safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Safety Instructions 3. Setup and Assembly 4. Specifications 5. Operating Instructions 6. Maintenance and Care 7. Troubleshooting

Features at a Glance

The KS 216 M offers a range of features designed for efficiency and precision:

Powerful 1600W motor for smooth cutting.
Adjustable mitre angles up to 45° left and right.
Laser guide for accurate cutting lines.
Dust extraction port for cleaner workspace.
Lightweight and portable design for easy transport.

Safety Instructions

Always prioritize safety when operating the mitre saw:

Wear appropriate personal protective equipment (PPE).
Ensure the work area is clean and free of obstructions.
Keep hands away from the cutting area.
Disconnect power when changing blades or making adjustments.

Setup and Assembly

Follow these steps to set up your Metabo Mitre Saw:

Unpack the saw and check for any damage.
Attach the saw to a stable workbench using the provided clamps.
Connect the dust extraction system if available.
Install the appropriate blade for your cutting needs.

Specifications

Power: 1600W motor.
Blade Diameter: 216 mm.
Cutting Capacity: 0-45° mitre angle.
Weight: 12.5 kg.
Dimensions: 600 x 500 x 400 mm.
Noise Level: 95 dB(A).
Vibration Level: 2.5 m/s².

Operating Instructions

To operate the KS 216 M, follow these steps:

Adjust the mitre angle as needed.
Power on the saw and allow it to reach full speed.
Guide the material into the blade slowly and steadily.
Turn off the saw after completing the cut.

Maintenance and Care

Regular maintenance is essential for optimal performance:

Clean the saw after each use to remove dust and debris.
Check and replace the blade as needed.
Inspect electrical cords for damage.
Store in a dry place to prevent rust and corrosion.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Saw does not start	Power supply issue	Check power connection and switch.
Blade not cutting	Dull blade	Replace with a sharp blade.
Excessive vibration	Improperly mounted blade	Ensure blade is securely attached.
Laser guide not visible	Battery issue	Replace the battery in the laser unit.

Service: For further assistance, contact Metabo customer support.